8CH receiver switch relay module DC 12V 24V 433MHz controller and 8 channel remote control transmitter

8CH receiver switch relay module DC 12V 24V 433MHz controller and 8 channel remote control transmitter

Wireless control, easy to install.
Control lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other devices with DC12V 24V.
You can turn the receiver on and off with the transmitter (remote control) from anywhere within a reliable distance. The wireless RF signal can pass through walls, floors and doors.
This switch can learn different coding remotes (such as 2262, 1527).
One/several transmitters can control one/several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.

If you use multi-button transmitter, you can control the controller with different buttons, they will not affect each other.
Working frequency: 433MHz
Wireless receiving controller, high privacy, stable performance, low power consumption feature, jump line or dial code switch coding.

About buyer:

Working voltage: 12V or 24V
Quiescent current: less than 10ma
Working current: 30mA (1 relay)
Operating temperature: -40'C - +80'C
Receiving sensitivity: more than -105dbm
Working frequency: 433MHz optional
Relay: 10A acac10a AC125V 10A DC30V 10A DC28V
Maximum load: 10A relay, resistive load less than 8A, inductive load less than 3A
PCB size: 73mm*82mm*17mm
Case size: 80*100*28mm

About the transmitter:

Channel: 8CH
Remote control distance: 0-200M (Ideal distance without any block and signal interference, rises and falls about 10%-90% with block and signal interference.)
Coding: PT2262
Frequency: 433MHz
Size: 125mm x 49mm x 20mm
Power supply: 1X12V/23A battery (battery not included)

Function:

1) Momentary/Jog: press and hold = on, release = off
2) Toggle/self-locking: press 1 button = on, press the same button again = off
3) permanent/inter-lock: press 1 button = on, press other button = off

Jumper cap adjustment method:

Momentary Pin1,2,3 and 4, no connection
Pin 1 + 2 switch
Permanent Pin 3 + 4
1-4 momentary 5-8 toggle pin 1+2,Pin 1+2

Open code and learning code:

1) Education; Press the learning button 1 time, the learning LED will turn on, then press the transmitter key to learn. Learning LED flashes and turns off. It means learning successfully.
2) Clear; Press the learning button for 5 seconds, the learning LED will flash and turn off, which means the code has been cleared.

Package Included:

Package includes 1
1pc 12V receiver + 1pc transmitter (without battery)
Package includes 2
1pc 24V receiver + 1pc transmitter (without battery)
Package includes 3
1 x transmitter (without battery)