Anycubic UV Resin 1000 ml White

Anycubic UV Resin 1000 ml White

Anycubic UV Resin 1000 ml - resin is a professional LCD molding resin.

LCD optimizes low light source generation.

Printing efficiency is higher than market compatible DLP/LCD/SLA resin.
Provides high speed solidification.

This resin ensures the strength of the molded parts and does not provide excessive shrinkage, but also increases the printing speed, shortens the curing time and increases the printing efficiency of LCD machines as much as possible.
The model has strong adhesion and is easy to remove after shaping.

Not only high success rate of printing and precision, but also to minimize resin separation force and adhesion.

Makes it easy to clean the machine and model.

The material is hard and sturdy.
The strong material in the shovel model can easily lead to the model breaking apart, but too flexible material will be prone to details of compression tensile deformation or fracture, which will affect the molding accuracy and aesthetics.
The performance of the model is stable.
The resin is stable under different climatic conditions and is also easy to store, easily dampening softening and environmental corrosion, overcoming the shortcomings of other resins.

Technical specifications:

Parameter information:
Main material: Resin monomer and photoinitiator
Exposure parameters: Lower exposure time 20-60sec, normal exposure time 5-15sec

Measures:

Storage method:
Store at room temperature away from light seals. (Sunlight contains a lot of UV light, solidifying the photosensitive resin. After testing, the light is not affected as long as there is no UV light).

It is recommended to save at an ambient temperature of 15 ºC - 35 ºC, the lower the temperature, the higher the viscosity of the resin. Closed storage, excessive dust or moisture may affect print quality. Sunshine contains a lot of UV light, solidifying the photosensitive resin.

Use:
Shake well before use, prohibiting the use of resin in places with too much sunlight.
Wear gloves and ventilate the room before use to avoid direct contact with skin.
Accidental contact, rinse with plenty of water as soon as possible. If you feel unwell, seek medical help in a timely manner.
Printed models need to use high concentration alcohol to clean about 30S (recommended concentration 95% or more, the higher the better).
Do not pour the resin in the resin vat into unused resin, do not leave the resin in the resin vat for a long time without using, to prevent resin contamination from affecting the printing effect (resin cannot be put in airtight containers for a long time or covered with plastic wrap shading).

The resin has a shelf life of up to 18 months.