Anycubic Wash & Cure 3 Plus Washing and Curing Device

Anycubic Wash & Cure 3 Plus Washing and Curing Device

Features:

Size Upgrade, Capacity Increase
Compared with Anycubic Wash & Cure Plus, the washing volume of the washing basket is increased by about 13.4% to 7.6 liters, and the total volume of the washing bucket is 12 liters, which is suitable for light-curing 3D printers of 10.6 inches and below.

At the same time, the curing size increased by 42% up to φ220*260 millimeters to accommodate larger and more models in a single post-processing session.

General Curing and Partial Developed
The innovative Flexicure gooseneck light design increases the energy value by 30,000uW/cm²* in the irradiation range of 1~3cm, greatly improving the curing effect on details such as the top of the model and the skirt of the figure.

Anycubic Wash & Cure 3 Plus features a brand new lamb bead pattern combined with a lens light source. Offers a 20% improvement in curing uniformity compared to the previous generation Anycubic Wash & Cure Plus*. This ensures a more thorough and complete cure of the model, resulting in better quality and consistency.

Double Layer Design, IPA Saving
Double-layer PP material cleaning basket supports washing with platform. It is equipped with two adjustable heights of 150 millimeters and 250 millimeters, allowing printing platforms from 6.6 to 10.6 inches, maximizing alcohol handling efficiency.

A brand new double-layer curing platform is adopted, which increases the number of models cured per cycle and greatly improves the curing efficiency.

Simple Operation, Quiet and Efficient
Dual modes of cleaning and curing easily selected with one click; The improved Gooseneck light curing mode can be easily turned on and off with one click. The cleaning and curing time can be easily adjusted optionally from 1 to 30 minutes.

Thanks to a more sealed structural design and software optimization, noise interference during cleaning and curing is reduced, creating a quieter and more comfortable working environment.