English - TL
Türkçe
Arduino TP4056 Protected Lithium Lipo Battery Charging Circuit Mini USB Battery Charging Circuit 1A 5V
| Brand | : SANEC |
| Stock Code | : A.77 |
| Price Including VAT | : 34,58 TL |
| Bank Transfer | : 33,20 TL (%4 remittance discount) |
| Quantity | 5-10 | 11-30 | 31-100 | 101-1000 |
| Discount | %10 | %15 | %20 | %25 |
Easy Payment
Fast shipping
Reliable Shopping
Campaigns (1)
By using the payment method via bank transfer to the buyer %4 DiscountArduino TP4056 Protected Lithium Lipo Battery Charging Circuit Mini USB Battery Charging Circuit 1A 5V
This module is made with TP4056 lipo charging chip.
It can charge 1-cell lithium batteries or charge batteries connected in parallel.
TP4056 has a simple circuit structure, good protection and precise charging.
This module has a fully automatic charging mechanism.
It is made of SMD materials.
The module has self-regulation current capability.
It is possible to charge between 100mA and 1000mA.
The charging current is set as 1A.
If you want, you can change the current value by changing the resistor.
The module receives the supply voltage from the Mini USB or the supply input pads on the card.
Test current can be measured from the input side.
Charging current should be 0.37 of the battery capacity.
It is suitable to charge a 1A battery with 0.4A.
Charging with high currents in a shorter period of time may damage the battery.
The wires to be used in power supply and battery connections must be of high quality.
Poor quality cables will affect the charging current due to their resistance.
The red LED indicator works while charging.
When charging is finished, the green indicator LED turns on and it means that the charge is finished.
Charging voltage should not be over 5V. Supply voltage exceeding 5V will cause heat. This causes the charging current to decrease. The integrated temperature of 60 degrees is normal.
Use of:
The card is powered from the mini USB socket or IN+- inputs.
The battery cell to be charged is connected to B+ and B- pins.
Load can be connected from Out+ and Out- pins. The load should be separate when charging.
The red LED turns on while charging. When charging is finished, the green LED turns on.
Never charge batteries with a rating greater than 1C (50A) with this product.
Features:
TP4056 lithium charging integrated.
Charging method: CCCV (Constant Current-Constant Voltage)
Mini USB port
External input feed pads (IN + and IN-)
5V Input voltage
4.2V charging voltage
-10"C-85"C Operating temperature
Charging current 1000mA (can be changed between 100-1000mAh by changing the resistor.)
1.5% charging accuracy
Red charging in progress LED.
Green charging finished LED.
Reverse connection Protection: Yes
Protection IC: S8205A
Over discharge protection voltage: 2.5V
Over-current protection: 3A
Card dimensions 25-19-10mm
| Stock Code | A.77 |
|---|---|
| Barcode | 95gbn696j3n6nn8 |
| VAT | %20 |
| Categories | Arduino compatible sensors and modules |
| Brands | SANEC |
| Tags | Arduino TP4056 Korumalı Lityum Lipo Pil Şarj Devresi Mini USB Batarya Şarj Devre 1A 5V |
| Using Status | New |
