Bambu Lab A1 Mini 3D Printer

Bambu Lab A1 Mini 3D Printer

Bambu Lab A1 Mini 3D Printer is a product that attracts attention with its compact size but offers a great revolution in terms of technology.

Equipped with groundbreaking features in the world of 3D printing, this printer is designed to meet and exceed users' expectations.

Thanks to a high-resolution and high-frequency eddy current sensor, it perfects the printing process with its intelligent flow control feature.

In this way, it actively regulates the flow rate in line with the data obtained by pressure measurement and offers an uninterrupted printing experience.

Thanks to its fully automatic calibration feature, the printer automatically calibrates Z-offset, bed level, vibration resonance and nozzle pressure for every print job. While it saves time for the user, it also increases print quality.

It makes the work of users easier with its plug-and-play feature.

The printer comes fully installed and precisely calibrated, and can be ready for the first print in just 20 minutes.

It provides a quiet and smooth working environment with its ability to minimize engine noise. Thanks to the CoreXY motion control system, high-speed and high-quality prints are achieved.

It increases users' flexibility by offering remote control and monitoring via Bambu Studio or Bambu Handy.

It offers the ability to easily record timelapse videos with the built-in camera.

Standing out with its compact structure, Bambu Lab A1 Mini 3D Printer is a first-class 3D printing solution designed to meet users' needs and exceed their expectations.

Features:

Active Flow Rate Compensation: Bambu Lab A1 Mini 3D Printer revolutionizes flow control in 3D printing. It uses a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates for the flow rate based on the readings to be extruded with accuracy.

Fully Automatic Calibration: Bambu Lab A1 Mini 3D Printer performs various calibrations on its own. It automatically and precisely calibrates Z-offset, bed level, vibration resonance and nozzle pressure for EVERY print job.

Plug and Play: Bambu Lab A1 Mini 3D Printer comes to you fully installed and precisely calibrated. You can set up the device for the first print in just 20 minutes.

Active Motor Noise Cancellation: Bamboo Lab A1 Mini 3D Printer can calibrate parameters to match small individual differences between each drive motor. This compensates for the unwanted harshness of engine noise.

Bed Hanger with CoreXY Speed ​​and Quality: All-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and best of all, an advanced motion control that uses these features to print a 14-minute bench with quality and directly follow all speed bench rules system.

Synchronization with Bambu Studio and Bambu Handy: Control and monitor your printer remotely via Bambu Studio or Bambu Handy. You can also record timelapse videos thanks to the built-in camera.

Technical specifications:
Building Volume: 180x180x180 mm³
Chassis: Steel
Hotend: All Metal
Extruder Gears: Steel
Nozzle: Stainless Steel
Maximum Hot End Temperature: 300℃
Nozzle Diameter (Included): 0.4 mm
Filament Cutter: Yes
Filament Diameter: 1.75 mm
Build Plate: Bamboo Textured PEI Plate
Maximum Build Plate Temperature: 80℃
Maximum Speed ​​of Tool Head: 500 mm/s
Maximum Acceleration of Tool Head: 10m/s²
Control Card Fan: Closed Loop Control
Hopper Temperature Regulator Fan: Closed Loop Control
Auxiliary Part Cooling Fan: Closed Loop Control
Supported Filaments: Ideal: PLA, PETG, TPU, PVA, PET, ABS, ASA
Room Monitoring Camera: :Low Speed ​​Camera 1080P (Timelapse Supported)
Filament Sensor: Yes
Filament Odometry: Yes
Power Loss Recovery: Yes
Product Size: 347x315x365 mm³
Net weight: 5.5kg
Package size: 385x430x495 mm³
Electrical Requirements: 100-240 VAC, 50/60 Hz, 1000 W @220 V, 350 W @110V

Package Included:
1 x Bamboo Lab A1 Mini 3D Printer

Printing Technology: FDM