Voltage Amplifier 1800W 40A DC DC 12V-90V Voltage Amplifier With Cooling Fan

Voltage Amplifier 1800W 40A DC DC 12V-90V Voltage Amplifier With Cooling Fan

Module output voltage, current adjustable, can increase, constant current
Input can be adjusted.

It has low voltage protection, over temperature protection, short circuit protection, reverse connection protection.

1800W is designed for lead acid batteries, lithium batteries, solar cells or power boosters to boost electric vehicles and charge batteries. It is very powerful.

1. For example, the original battery of an electric vehicle is 48V and amplified to 60V to power the electric vehicle, which can increase the speed and acceleration of the electric vehicle.

2. For electric bike charging, (A: For example, you have a 12V or 24 idle battery in your hand, you can use this boost power supply to boost the original battery after charging, equivalent to an electric car charging treasure. 2: Simultaneous input can also be used for the electric vehicle's battery Solar cells, wind energy, generators and other power can be connected to the original battery to increase its life.)

3. The battery voltage can be increased to allow the electric vehicle to run faster and the meter should not exceed 10V.

4. Solar panel boost voltage regulation.

Features:
1. With air foil type heat dissipation, the heat dissipation effect is very good and the output power is larger (the power of 48V input and fan can reach about 1800W).
2. Temperature controlled fans, with hydraulic bearing fan, very good balance between noise and heat dissipation. When the load is light, the fan does not rotate. The fan rotates automatically after the temperature of the load reaches about 60 degrees. It can effectively reduce noise and extend lifespan.
3. The main power tube insulation board is made of high-grade alumina, and its thermal conductivity is 10 times that of ordinary insulation mats.
4. 100V 210A-247 large package power tube has large power margin and good dynamic response.
5. Double large size ferro-silica-aluminum magnetic rings using four 1.2 pure copper enameled wires with low heat generation and high efficiency.
6. With a new design, the conversion efficiency is as high as 98.1% (see the datasheet efficiency conversion curve below for details).
7. Brand 3296W multi-turn potentiometer, high adjustment accuracy, small drift.
8. Kang copper output current sampling, constant temperature and stable temperature drift is small.
9. Low voltage protection can be adjusted, which can effectively protect various batteries and can also be used for solar cells.
10. With constant current function, it can be used to boost the battery car, charge the battery and so on.