Wash And Cure 3.0 Washing and Curing Machine

Wash And Cure 3.0 Wash & Cure Machine

Larger Size for Increased Capacity

Compared with Anycubic Wash & Cure 2.0, the cleaning bucket capacity of Anycubic Wash & Cure 3 has now reached 3 liters, an impressive increase of 100%.

The total volume of the cleaning bucket has been increased to 4 liters.

This makes it perfectly adapted for LCD (light-cured) 3D printers with a size of 7.3 inches or smaller.

The curing size has been increased by 15% to 160*180 millimeters to accommodate larger and more models for a single post-processing session.

Localized Strengthening, Uniform Curing

The "Innovative Flexicure Gooseneck Light Design" significantly strengthens the curing effect on thin areas such as the upper part of models and the hem of garments by increasing the energy value by 30,000uW/cm² within the irradiation range of 1-3cm.

Adopting a brand-new arrangement of light beads and lens light source, the curing uniformity of Anycubic Wash & Cure 3 has been increased by 20% compared to the previous 2.0.

This results in a more comprehensive and comprehensive improvement of the entire model.

Double-layer Design, IPA Saving

The double-layer PP material cleaning basket is designed to support simultaneous cleaning with the platform.

It has two adjustable heights at 100mm and 165mm, providing flexibility to adapt to printing platforms ranging from 5.9 inches to 7.3 inches.

This design maximizes the efficiency of IPA usage.

Simple Operation, Quiet and Efficient

Dual mode cleaning and curing can be easily selected with one click; Improved Gooseneck light curing mode can be easily turned on and off with one click.

Infinite rotary knob control, adjustable from 1 to 30 minutes as desired.

A more isolated structural design and software optimization reduce noise interference during cleaning and curing, creating a quieter and more comfortable working environment.